System Requirements
 After purchasing IP-Phone account from Thaitel.com, you would get Thaitel PLUS account & password, which account will have format like 0029xxxxxx
High speed internet connection or LAN
Cisco ATA-186 and telephone
Telephone line
How to config IP Phone
How to config Thaitel Account
How to make a call
How to config Cisco ATA-186
Configuring Thaitel Account through a Web Browser
Once you have IP connection from the ATA-186 to any PC, you can perform the remaining configurations through the web server.
If you want to check ip address, please pick up the handset of your phone and press the red button on Cisco ATA-186. And then press 80# on the phone. You will hear IP Address from IVR.
1. Open web browser and type in
http://ip address/dev like in the picture below.
(If you want to config ip address click here.)
1.1
2. A set up page will be displayed, set as following the picture below.
2.1
Configure your screen guide :
1. StaticIP : type IP address in this box
2. StaticRoute : type static route value in this text box
3. StaticNetMask : type static net mask value
4. UID0 : Thaitel Account
5. PWD0 : Thaitel Password
6. GkOrProxy : ipphone.thaitelplus.com
7. UseLoginID : 1
8. LoginID0 : Thaitel Account
9. UseSIP : 1
10. SIPRegOn : 1
11. SIPPort : 5060
12. OutBoundProxy : ipphone.thaitelplus.com
To make sure that all of functions like in the same status as the picture, then click apply for saving configuration.
3. On new configured screen, press [Click here to reload] once to reload new configuration (see picture below).
3.1
Now you can exit the web browser and start making your call by following the section below.
[back to top]
How to make a call
To make a call between Thaitel Account
Enter Thaitel Account number and dial
For example : 002900xxxx and dial
To make a call to normal phone or call phone
Enter destination number in this format
[ Country code + City Code + Phone Number ]
For example
Calling to USA : 1800 + phone number
Enter : 18007737126
Calling to England : 44 + City Code + Phone number
Enter : 447880999999
Calling to Bangkok : 66 + 2 + phone number
Enter : 6621234567
Calling to Mobile phone : 668 + Mobile phone number
Enter : 66871234567
[back to top]
Configuring Cisco ATA-186 through the IVR, perform the following steps.
1. Connect an analog touch-tone phone to the port labeled "PHONE 1" at the back of the ATA186.
2. Pick up the handset from the phone, and press the clear function button on top of the ATA 186. You will hear the initial IVR prompt.
Note: The IVR cannot be used or heard unless your phone is connected to the second port of the ATA labeled "PHONE 2".
3. You will be prompted to enter a menu number followed by the # key. Key in the menu number using the touch-tone pad. The following table lists the menu options that you will need, in order to configure basic IP connectivity to the ATA.
| IVR Menu Number |
Feature |
| 1 |
IP Address (StaticIP) |
| 2 |
Default Gateway (StaticRoute) |
| 10 |
Subnet Mask (StaticNetMask) |
| 20 (0 = Disable, 1 = Enable) |
DHCP (DHCP) |
| 80 |
Check IP Address |
Note: If you set DHCP to 1 the ATA-186 will automatically detect the Static IP, Statice Route, StaticNetMask.
Note: Press the * key to indicate a delimiter (dot). For example, 192*168*3*1 would be used to enter an IP address via the touchpad.
Note: When entering values for a field that is in hexadecimal, you must convert it to a decimal value in order to enter it into the IVR system. For example to enter the hex value 0x6A, you would key in the number 106 in the IVR.
4. Press the # key after you have entered the value. If you do not press #, the system will automatically timeout after 10 seconds. You will hear a recording of the value you entered, followed by a request to press one of the following keys:
1 Change your entered value.
2 Review your entered value.
3 Save your entered value.
4 Review the current saved value.
5. After completing the configuration through the IVR, press the # key to exit.
Note: To confirm that you are using the correct IP address, press 80# on IVR.
[back to top]
|
